LED

Status indication for battery and scanner.
 

Touchscreen

The screen reacts to touch. The input fields on the screen can either be selected with the input pen (on the back of the terminal) or the finger.

Scanner-Keys

The scanner can read data from a label. By pressing one of the trigger-keys the scanner will be activated while the scanner software is running. Further keys can be configured if necessary.

Cursor-Keys

The cursor-keys serve in principle to change between switching surfaces represented on the screen or to move the insert mark in input fields.

Keypad

Via the keypad you enter numbers and letters. To switch between numbers and letters use the key [F4] / [ALPHA]. In the status line at the lower edge of the screen the selected input method is shown symbolically.

Enter-Key

With the enter key inputs are finalised. Thus the program is instructed to accomplish the action chosen by you, for example use a selected button or store an entered number.

[CLR]-Key

The CLR-Key ("Clear"-Key) deletes the marked data in an input field, or rather the character left to the cursor. The key combination [Fn] + [CLR] leaves the actual screen if it is a simple dialogue window.

Programmable Key

Default setting is F25 (0x0088) that can be changed through the registry, e.g. to VK_TAB.

[Fn]-Key

With [Fn] - key additional input functions can be activated. In the status line at the lower edge of the screen the activated [Fn] - key is shown symbolically. By the gradual combination of an [Fn] - key and a further key you will reach the following functions:

[Fn] + [0]	Fade in or out the software input panel
[Fn] + [1]	Switch on or off the backlight
[Fn] + [2]	Decrease the contrast
[Fn] + [3]	Increase the contrast
[Fn] + [4]	Calibration of the touch screen
[Fn] + [5]	Darken the backlight
[Fn] + [6]	Brighten the backlight
[Fn] + [7]	Starts a program (full path must be saved to Registry)
[Fn] + [8]	Starts a program (full path must be saved to Registry)
[Fn] + [9]	Starts a program (full path must be saved to Registry)
[Fn] + [F1]	Starts a program (full path must be saved to Registry)
[Fn] + [F2]	Starts a program (full path must be saved to Registry)
[Fn] + [F3]	Starts a program (full path must be saved to Registry)
[Fn] + [F4]	Starts a program (full path must be saved to Registry)
[Fn] + [CLR]	Display the functional character ESC

[F]-Key / [Alpha]-Key

The F-Keys [F1] to [F8] are related to the following functions:

[F1]	Delete character left to the cursor ("BS" = "Backspace")
[F2]	Display the character "-"
[F3]	Display the character "."
[F4] / [Alpha]	Switch between the input of numbers and letters